Styrene Butadiene Based Mortar Modifying & Bonding Agent.
Styrene Butadiene Based Mortar Modifying & Bonding Agent.
Bostik Anchor Grout is polyester resin based grout material suitably blended with a hardening compound and fillers and supplied as a pre measured, two part, resin grout. After hardening, the grout has high mechanical properties. Bostik Anchor Grout is used where the difference between the hole diameter and bar diameter is = 25mm.
Bostik CCC is a wax based concrete curing compound which incorporates a special alkali reactive emulsion breaking system. This system ensures that the emulsion breaks down to form a non penetrating continuous film immediately upon contact with a cementitious surface. This imprevious film prevents excessive water evaporation, which in turn permits more efficient cement hydration, thus reducing shrinkage and increasing durability.
Once formed, the membrane will remain on the concrete surface until eventually broken down or eroded by natural weathering. Where it is required to apply a further treatment to such concrete surface, it may be necessary to remove the membrane remaining after curing by wire brushed or other mechanical means.
To accelerate the setting and high early strength gain of Portland cement without introduction Chloride.
BOSCOPLAST SP330 is chloride free, high range water reducing super plasticiser. It contains Sulphonated Naphthalene polymers, and is specially formulated to impart rheoplastic qualities to concrete.
BOSCOPLAST SP330 is specially formulated for high degree of workability and slump and high quality of concrete with reduced permeability.
BOSCOPLAST SP330 meets the requirements of ASTM C494 (Type A and F) and BS 5075 for high range water-reducing admixtures. Also confirms to IS9103 – 1999.
BOSCOPLAST SP300(A) is a chloride free, high range water reducing admixture. It contains Sulphonated Naphthalene polymers, and is specially formulated to impart rheoplastic qualities to concrete.
BOSCOPLAST SP300(A) is specially formulated for high degree of workability and slump retention and high quality of concrete with reduced permeability.
BOSCOPLAST SP300(A) meets the requirements of ASTM C494 (Type A and G) and BS 5075 for high range water-reducing and retarding admixtures. Also confirms to IS9103 – 1999.
Bostik ERM is a three component system based on specially formulated epoxy resins and hardeners, especially for repairs and rehabilitation of concrete structures. Many factors contribute to the damage of the structures like the natural factors ageing, weathering, earthquakes, fire accidents or exposure to aggressive environment resulting in atmospheric chemical corrosion, faulty design etc., With the help of Bostik ERM, it is possible to repair and strengthen the concrete to a great extent. This product can also be used for sealing of cracks, bonding old concrete to new concrete and for foundation grouting.
Duct groutin, bed grouting and Non shrink filling in cracks Jointing structural elements by injection and pressure grouting are the areas of application of Grout Admix.
Patchfix Concrete is a rapid setting, high early strength, shrinkage compensated repair concrete for patching roadways, pavements and floors. a special blend of cement and aggregates supplied in a ready to use form. The addition of water and mixing produces a high strength, heavy duty trowelable repair concrete that minimises shut time and allows the repair back in services in 2-3 hours.
Bostik Plug Leak ia fast setting hydraulic cement based water plugging compound.