Boscocem Slurry Premium is a cement based two component alkali reactive polymer modified waterproofing coating, with a flexible component for crack bridging.
Boscocem Slurry Premium is a cement based two component alkali reactive polymer modified waterproofing coating, with a flexible component for crack bridging.
Bostik Elastocoat is a high performance Elastomeric acrylic based water proofing coating with anti fungal & crack bridging ability. Recommended for protection of exterior cementitious surfaces.
Bostik LW is a chloride free admixture and supplied as brown liquid.
Bostik One is smooth aqueous liquid waterproofing dispersion for addition into cement renders and screed, which effectively blocks the passage of water and increase mortar resistance against water and chemicals.
We suggest the sequence to obtain optimum results.
1.Apply diluted Zycosil(1:10), on the brick structure till saturation.
2.Construct a concrete layer (coping) on the surface.
Suitable for the joint filling in wall and floor.
Suitable for tile joint filling in wall and floor.
Styrene Butadiene Based Mortar Modifying & Bonding Agent.
Bostik Anchor Grout is polyester resin based grout material suitably blended with a hardening compound and fillers and supplied as a pre measured, two part, resin grout. After hardening, the grout has high mechanical properties. Bostik Anchor Grout is used where the difference between the hole diameter and bar diameter is = 25mm.
Bostik CCC is a wax based concrete curing compound which incorporates a special alkali reactive emulsion breaking system. This system ensures that the emulsion breaks down to form a non penetrating continuous film immediately upon contact with a cementitious surface. This imprevious film prevents excessive water evaporation, which in turn permits more efficient cement hydration, thus reducing shrinkage and increasing durability.
Once formed, the membrane will remain on the concrete surface until eventually broken down or eroded by natural weathering. Where it is required to apply a further treatment to such concrete surface, it may be necessary to remove the membrane remaining after curing by wire brushed or other mechanical means.